These precision cast, stainless steel adapters are designed to fit virtually any putter with a 0.370″ parallel bore 90° socket and transform it into an entirely different putter regardless of manufacturer. Each has an attractive neutral bead blast finish and three styles to choose from. Directions: Simply test fit stem into the putter’s socket as it should be a tight fit. If it does not fit, lightly hand sand stem until it is snug. Apply quick setting epoxy to stem, seat and align adapter and allow the epoxy to harden. Lastly, install the new shaft – it’s that simple!
The H-001 Long-Broomstick adapter converts the lie angle to 79° for use as a long or broomstick putter as the post is designed to fit the inside diameter of the Apollo 53 inch long putter shaft. Weighs 20g and these will work for either a RH or LH putter.
The H-002 Slant Hosel adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie and reduced or non-offset configuration and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.
The H-003 Plumbers Neck adapter converts a RH putter designed to have a compound triple bent shaft with the proper lie/offset and accept a straight shaft. Weighs 44g. Creates a 72 degree lie angle.